Lately the stock fence developed a bow in the center of it that prevented any possibility of cutting an actual straight line. In the process of fiddling with the old fence, I broke part of the clamping mechanism. At this point, I was ready to buy a new quality fence. The Vega U26 appeared to have the highest reviews so I went with that. T-square Fence 5. Support leg (2) 6. Extension table 7. Leveling feet (2) 8. Rail setting template 10. Accessory storage drawer and frame assembly (included with purchase of DeLTA Unisaw) 11. Fence holder (2) 12. Fence clamping handle parts Hardware for attaching drawer to the drawer bracket 13. Page 6: Assembly.
Table Saw Fence
COMPARE PERFORMANCE & PRICE WITH ANY FENCE!
Being able to cut materials safely and precisely on your table saw is essential for fast and accurate Woodworking. Mariah carey glitter torrent. Unless saw fences are well designed they make cutting a chore instead of pleasure, resulting in poor quality and inaccu- rate cuts. Most Saw Fence Systems….
- Do not lock parallel to saw blade.
- Do not have accurate measuring scales.
- Have Fence Bars that are too short.
- Do not have adequate width ripping capacity.
- Require frequent re-alignment.
- Lack safety devices.
- Are unable to be finely adjusted.
The Vega Saw Fence Systems solve all of these problems (and more!) to assure Accurate and reliable cuts combined with smooth, precise motion.
FENCE ACCESSORIES
Vega manufactures a number of great accessories for the Professional and Util- ity Model fences making them more convenient, productive andsafer to use. All accessories are available for both models except the Leg Set which is not necessary for the Utility 26.
You compare the features!
EASY TO INSTALL
No other Fence can be installed on your saw as easily as The Vega Saw Fence, according to American Woodworker Magazine (Oct.92) I found theVega Model 50 the easiest to install of all the fences.
Vega Saw Fences are designed to use existing bolt holes (no drilling required) of Delta Unisaws and Contractors Saws, Powermatic Model 66,most Sears 10inchsaws and most other sawshaving fence rail mounting holes 8 - 9inchoneither side of the blade. Other saws may require drilling 2 or 4 holes. Little accuracy is needed as the Fence Mounting System allows full adjustment. (Installation may be as little as 15 minutes.)Features which help make this Fence so easy to install include:
- Pre-drilled and tapped holes to fit most saws.
- Slotted Front Brackets to allow vertical and horizontal adjustments.
- Jacking Plates to assist in leveling the Fence Rails
- Easy to follow instructions.
ALUMINUM FENCE HEAD
Extruded from 6005 T6 high strength aluminum, the Vega fence head closely contours the polished chrome front rail providing excellent fitand nearly eliminating side play in the fence during adjustment. In ad- dition, the combination of the polished chrome tube and the aluminum head produces an almost ideal bearing surface for lowfriction and long life. The fence head simply lifts off the front rail for quick fence removal and installation.
EXCLUSIVE MICRO ADJUSTMENTS!
The Vega Saw Fences are the only Fences with true Micro Adjustment capability. If you require precise adjustment from your tablesaw, thisis a necessary feature. The Micro Adjustment allows you to move the Fence very precisely in either direction, via a threaded rod humb nut combination. For the final adjustment of only a fewthousandths of an inch, Vega provides a threaded mechanism for final, precise setting.
To operate the Micro Adjust:
- Press down on the small knob at the right end of the Fence Head to lock the Micro Adjust Cam.
- Release the Main Cam.
- Rotate the Thumb Nut under the Fence head to move the Fence very precisely�¢â�¬�¦ (one full rotation of the nut is 1/16inch)
- After adjusting is complete, lock the Main Cam.
NO MORE BUMPING
and hoping for the best! With other saw fences precise adjustments is achieved using this technique.
Vega Professional Fence
MADE OF HIGH QUALITY MATERIALS
Vega has carefully chosen only the highest quality materials to construct their Saw Fences. Three unique precision aluminum extrusions, thehighest grade of plating quality tubing and super tough and attractive epoxy coating, combined with meticulous care in fabrication result in a truly superior product.
- Do not lock parallel to saw blade.
- Do not have accurate measuring scales.
- Have Fence Bars that are too short.
- Do not have adequate width ripping capacity.
- Require frequent re-alignment.
- Lack safety devices.
- Are unable to be finely adjusted.
The Vega Saw Fence Systems solve all of these problems (and more!) to assure Accurate and reliable cuts combined with smooth, precise motion.
FENCE ACCESSORIES
Vega manufactures a number of great accessories for the Professional and Util- ity Model fences making them more convenient, productive andsafer to use. All accessories are available for both models except the Leg Set which is not necessary for the Utility 26.
You compare the features!
EASY TO INSTALL
No other Fence can be installed on your saw as easily as The Vega Saw Fence, according to American Woodworker Magazine (Oct.92) I found theVega Model 50 the easiest to install of all the fences.
Vega Saw Fences are designed to use existing bolt holes (no drilling required) of Delta Unisaws and Contractors Saws, Powermatic Model 66,most Sears 10inchsaws and most other sawshaving fence rail mounting holes 8 - 9inchoneither side of the blade. Other saws may require drilling 2 or 4 holes. Little accuracy is needed as the Fence Mounting System allows full adjustment. (Installation may be as little as 15 minutes.)Features which help make this Fence so easy to install include:
- Pre-drilled and tapped holes to fit most saws.
- Slotted Front Brackets to allow vertical and horizontal adjustments.
- Jacking Plates to assist in leveling the Fence Rails
- Easy to follow instructions.
ALUMINUM FENCE HEAD
Extruded from 6005 T6 high strength aluminum, the Vega fence head closely contours the polished chrome front rail providing excellent fitand nearly eliminating side play in the fence during adjustment. In ad- dition, the combination of the polished chrome tube and the aluminum head produces an almost ideal bearing surface for lowfriction and long life. The fence head simply lifts off the front rail for quick fence removal and installation.
EXCLUSIVE MICRO ADJUSTMENTS!
The Vega Saw Fences are the only Fences with true Micro Adjustment capability. If you require precise adjustment from your tablesaw, thisis a necessary feature. The Micro Adjustment allows you to move the Fence very precisely in either direction, via a threaded rod humb nut combination. For the final adjustment of only a fewthousandths of an inch, Vega provides a threaded mechanism for final, precise setting.
To operate the Micro Adjust:
- Press down on the small knob at the right end of the Fence Head to lock the Micro Adjust Cam.
- Release the Main Cam.
- Rotate the Thumb Nut under the Fence head to move the Fence very precisely�¢â�¬�¦ (one full rotation of the nut is 1/16inch)
- After adjusting is complete, lock the Main Cam.
NO MORE BUMPING
and hoping for the best! With other saw fences precise adjustments is achieved using this technique.
Vega Professional Fence
MADE OF HIGH QUALITY MATERIALS
Vega has carefully chosen only the highest quality materials to construct their Saw Fences. Three unique precision aluminum extrusions, thehighest grade of plating quality tubing and super tough and attractive epoxy coating, combined with meticulous care in fabrication result in a truly superior product.
A. Front Guide Rails
The Front Fence Rail is a precision rolled, plating quality tube with a very thick wall for extreme stiffness. The bar is tapped for attachment of the front mounting brackets, table extensionplates, and the Vega leg kit (optional). It is chrome plated and plated and polished to provide an extremely low friction glide path for smooth and easy adjustment of the fence.
B. Rear Guide Rails
The Rear Fence Rail is a 1-1/2inchsquare tubepredrilled for mounting to the exist- ing holes (in most saws) and tapped to hold the extension table support plates and Vega leg kit (optional). The Rail is epoxy coated for low friction, highdurability, and an attractive finish.
C. The Fence Bar
The Vega Fence Bars are aircraft quality aluminum alloy extrusions shaped for extreme stiffness while being relatively lightweight for easy handling. They are very accurate bars with side flatnessheld to extremely close tolerances, resulting in a very uniform surface to guide material through the saw blade for precision cuts. The Fence Bars have a Black Anodized finish which providesextreme surface hardness and low friction.
Vega Fence Installation Instructions
D. Mounting Brackets
These extruded aluminum mounts help to make the Vega Saw Fence the easiest and fastest aftermarket saw fence to install. They provide simple and accurate vertical and horizontal adjustment for thefront guide rail and simply bolt to the saw table through existing holes (in most saws).
E. Jacking Plates
To further assist in easy and accurate installation, jacking plates (4) are provided at the mounting points of the front and rear rail to make leveling and setting fence clearance easy.
Vega Fence Owner's Manual R S Manual Pdf
F. Rear Hold Down Bracket
The rear hold down bracket prevents the rear of the fence from raising if the fence issued in conjunction with stock feed systems. It is adjusted to just clear the lower side of the rear guiderail.
Vega Fence Owners Manual Craftsman
Support Plates For Extension Tables
(All Models except Pro 26 and Utility 26) To extend the work surface of your saw, Vega provides four Table Support Plates. These Plates are bolted to the underside of the Front and Rear Fence Railsto support an extension table which can easily construct. In addition, the extension table will strengthen the Saw Fence System.
